1. Connect to the BRICK with telnet or a terminal
2. enter "setup", the following menu appears:
BIANCA/BRICK-XM Setup Tool (c) 1996 by BinTec Communications GmbH
brick_xm
_______________________________________________________________________________
Licenses System
Slot1: CM-BNC/TP, Ethernet
Slot2: CM-1EBRI, ISDN Enhanced S0
Slot3:
IP IPX X.25
ISDN Partner
Configuration Management
Monitoring and Debugging
Exit
_______________________________________________________________________________
Press <Ctrl-n>, <Ctrl-p> to scroll through menu
items, <Return> to enter
3. Choose "System":
BIANCA/BRICK-XM Setup Tool (c) 1996 by BinTec Communications GmbH
Change System Parameters brick_xm
_______________________________________________________________________________
System Name brick_xm
Local PPP ID bintec
Location Germany
Contact BINTEC
admin Login Password/SNMP Community bintec
read Login Password/SNMP Community bintec
write Login Password/SNMP Community bintec
RADIUS Server Password
Syslog output on serial console no
Message level for the syslog table info
Maximum Number of Syslog Entries 20
External System Logging >
SAVE CANCEL
______________________________________________________________________________
Set "Message level for the syslog table" to
"debug"
4. enter "message" at the BRICKs' prompt or "debug
all" or examine the logfiles