Configuring isdnlogin between BinTec-Card (except DOS/Windows)
and BRICK
========================================================================
You have the possibility to realize isdnlogin from BinTec Card to
BRICK and
the other way.
1. Example:
-------------
1.1. BRICK
- - - - - -
ISDN numbers of BRICK: 089/9671111 (for Routing)
089/9671112 (for Login)
On BRICK you have to configure this mapping as follows:.
In setup-Tool ----> WAN-Interface (or Slot with ISDN module)
--->
Incoming Call Answering
BIANCA/BRICK-XM Setup Tool BinTec Communications GmbH
[SLOT 2 ISDN BRI][INCOMING]: Incoming Call Answering tina_brick
_______________________________________________________________________________
Item Use/Don't Use Local Number
Routing (IP,IPX,X.25,BRIDGE) <X> 1111
Login <X> 1112
CAPI 1.1 EAZ 0 Mapping < >
CAPI 1.1 EAZ 1 Mapping < >
CAPI 1.1 EAZ 2 Mapping < >
CAPI 1.1 EAZ 3 Mapping < >
CAPI 1.1 EAZ 4 Mapping < >
CAPI 1.1 EAZ 5 Mapping < >
CAPI 1.1 EAZ 6 Mapping < >
CAPI 1.1 EAZ 7 Mapping < >
CAPI 1.1 EAZ 8 Mapping < >
CAPI 1.1 EAZ 9 Mapping < >
SAVE CANCEL
_______________________________________________________________________________
Enter string, max length = 24 chars
1.2. BinTec Card
- - - - - - - - -
ISDN numbers of Bintec Card: 0911/6751234 (for isdnlogin)
0911/6751232 (for isitools !!!!)
0911/6751233 (for tcp/ip and ppp)
Mapping in boards-file for Euro ISDN: -e1=1232 -e2=1233 -e3=1234
ATTENTION: For isdnlogin you cannot use the same MSN as for
isitools!!!
If not yet configured you need the service "isdnlogin in
/usr/bianca/vonfig/services
LOCAL isdnlogin 0070003 NOL3
* isdnlogin 007000 NOL3
Also in /usr/bianca/config/cond you have to configure this
service
isdnlogin:all: :::UTMP:/usr/bianca/bin/isitoold -l :tirdwr
2. BinTec Card ----> BRICK:
-----------------------------
root@isigate/> isilogin -s isdnlogin =0899671112
Trying...
Connected to =0899671112
Escape character is '~'
Connected to BIANCA/BRICK, brickxs1,
from ISDN telephonnumber 9116751234 Service data
Welcome to BIANCA/BRICK-XM version V.4.4 Rev.6 from 97/05/30
00:00:00
systemname is tina_brick, location BinTec Customer Service
Login:
3. BRICK ----> BinTec Card:
-----------------------------
brick> isdnlogin 09116571234
Trying...
Establishing B-channel...
Connected to 09116571234
login:
4. Annotations:
---------------
If you just have on MSN for the BRICK take a look on FAQ 27 to
configure the BRICK!