Release History Topics

Release History Topics for the BIANCA/BRICK family

More detailed descriptions in the corresponding release notes

Contents

• Dates of issue
• Classification of features and bugfixes
• Topics of features and bugfixes
• BinTec Documentation

Dates of issue

Back to Contents

Classification of features and bugfixes

1. BRIDGE
2. CAPI
3. DHCP
4. FAX
5. HTTP
6. INET
7. IPX
8. ISDN
9. MISCELLANEOUS
10. MODEM
11. MODULE
12. NAT
13. OSPF
14. PABX
15. PMX
16. POTS
17. PPP
18. RADIUS
19. RELEASE
20. SETUP
21. SNMP
22. STAC
23. SYS
24. TAF
25. TAPI
26. V110
27. VPN
28. X.21
29. X.25

Back to Contents

Topics of features and bugfixes

1. BRIDGE:
   • New bridging variables, Release 4.9 Rev. 4, Features
   • Compensation of Multiple Paths problem fixed, Release 4.9 Rev. 4, Bugfixes
   • Problem involving the dot1dStpPortPriority/dot1dStpPortPathCost variables (which could not be changed) fixed, Release 4.9 Rev. 4, Bugfixes
   • Source Routing Bridge compatibility, Release 4.8 Rev. 1, Features
     
     
2. CAPI:
   • Accepting Calls with CAPI 1.1 Applications problem fixed, Release 4.9 Rev. 4, Bugfixes
   • CAPI and Incorrect Bearer Capability singalling problem fixed, Release 4.9 Rev. 4, Bugfixes
   • Reboot no longer required after changing biboAdmCapiTcpPort and biboAdmTapiTcpPort variables, Release 4.9 Rev. 4, Bugfixes
   • Rare problems with outgoing CAPI calls on EBRI module fixed, Release 4.9 Rev. 3, Bugfixes
   • Problems with some PABX not understanding called party number fixed, Release 4.9 Rev. 3, Bugfixes
   • Missing CONNECT_B3_IND with X.25 bug fixed, Release 4.8 Rev. 6, Bugfixes
   • Remote CAPI can now be configured using the capiConfigTable, Release 4.8 Rev. 5, Bugfixes
   • CapiConfigModemDefault is now correctly initialized, Release 4.8 Rev. 2, Bugfixes
   • Occasional connection tear-down in transparent mode fixed, Release 4.8 Rev. 2, Bugfixes
   • Remote Multi CAPI Client (RMCC), Release 4.8 Rev. 1, Features
   • System hangs with slow CAPI applications fixed, Release 4.8 Rev. 1, Bugfixes
   • Problems receiving invalid fax data fixed, Release 4.8 Rev. 1, Bugfixes
   • Character loss with multiple capitraces fixed, Release 4.8 Rev. 1, Bugfixes
   • Isdntrace on CAPI TCP port does not boot system, Release 4.7 Rev. 1, Bugfixes
   • CAPI2_INFO_IND contains correct info number, Release 4.7 Rev. 1, Bugfixes
   • Generate "sending complete" indication, Release 4.6 Rev. 4, Bugfixes
   • GET_VERSION, GET_SERIAL_NUMBER suppport, Release 4.6 Rev. 2, Features
   • Compression/error correction can be set, Release 4.6 Rev. 1, Features
   • CAPI2.0, DirectDialIn (DDI) handling now correct, Release 4.6 Rev. 1, Bugfixes
   • CAPI2.0, INFO messages now available , Release 4.6 Rev. 1, Bugfixes
   • DTMF Tone Recognition (XS office/V!CAS), Release 4.5 Rev. 5, Features
   • Improved Hardware Fax Support (XS office/V!CAS), Release 4.5 Rev. 5, Features
   • Wrong multi-controller number (PLCI) bug, Release 4.5 Rev. 5, Bugfixes
   • No reboots on incorrectly coded DATA_B3_REQ or CAPI2_RESET_B3_REQ, Release 4.5 Rev. 5, Bugfixes
   • CapiMultiControllerTable, Release 4.5 Rev. 3, Features
   • Fax Polling with CAPI2.0, Release 4.3 Rev. 11, Bugfixes
   • Improved performance with remote CAPI interface, Release 4.3 Rev. 10, Bugfixes
   • Div. fixes, Release 4.3 Rev. 2, Bugfixes
     
     
3. DHCP:
   • In rare cases "reserved" addresses were used nevertheless, Release 4.9 Rev. 3, Bugfixes
   • Rejecting requests from other LAN address (RFC2131), Release 4.6 Rev. 2, Features
   • Static IP numbers for MAC adresses, Release 4.6 Rev. 1, Features
   • DNS forwarding (RFC 1036), Release 4.4 Rev. 8, Features
   • Dynamic Host Configuration Protocol (DHCP), Release 4.4 Rev. 4, Features
     
     
4. FAX:
   • FAX Storage: MSG LED Support, Release 4.9 Rev. 4, Features
   • FAX Storage: New msgForwardTable variable, Release 4.9 Rev. 4, Features
   • FAX Storage: BinGO! Plus/Pro now generates it's own FAX ID, Release 4.9 Rev. 4, Features
   • Fax Storage: Repeated Fax Forwarding problem fixed, Release 4.9 Rev. 4, Bugfixes
   • Fax Storage: Acceptance of Incoming Calls problem fixed, Release 4.9 Rev. 4, Bugfixes
   • Fax Storage: Fixed reboot problem in connection with FAX forwards on CAPI apps, Release 4.9 Rev. 4, Bugfixes
   • T.30 Carrier detection (V.21) problem fixed, Release 4.9 Rev. 4, Bugfixes
   • Problems involving Fax Applications with Protocol Switching fixed, Release 4.9 Rev. 4, Bugfixes
   • Multiple Fax Forwarding with different Extensions problem fixed, Release 4.9 Rev. 4, Bugfixes
   • T.30 carrier detection was improved, Release 4.9 Rev. 3, Bugfixes
   • Rare problems with outgoing CAPI calls on EBRI module fixed, Release 4.9 Rev. 3, Bugfixes
   • Problems with high-amplitude fax devices fixed, Release 4.9 Rev. 3, Bugfixes
   • Transmission bugs with speeds higher than 9600 corrected, Release 4.6 Rev. 3, Bugfixes
   • Hardware-FAX support with FML-8MOD modem module, Release 4.6 Rev. 2, Features
     
     
5. HTTP:
   • Internet Explorer 4.0 problem fixed, Release 4.9 Rev. 4, Bugfixes
   • POTS interfaces are displayed correctly, Release 4.8 Rev. 5, Bugfixes
   • HTTP daemon, Release 4.4 Rev. 2, Features
   • New HTTP Server to get status information, Release 4.4 Rev. 1 beta, Features
     
     
6. INET:
   • IP Route Announcement, Release 4.9 Rev. 1, Features
   • Frame Relay support, Release 4.8 Rev. 6, Features
   • IP Filter for TCP state and ICMP type, Release 4.8 Rev. 6, Features
   • Access list bug with fragmented IP packets fixed, Release 4.8 Rev. 6, Bugfixes
   • TELNET problems with BSD Unix system fixed, Release 4.8 Rev. 3, Bugfixes
   • Reboot problem during conversion of complex access lists solved, Release 4.8 Rev. 2, Bugfixes
   • New access lists, Release 4.8 Rev. 1, Features
   • RIP V2 Multicast support, Release 4.8 Rev. 1, Features
   • New local TCP/UDP service access rules, Release 4.8 Rev. 1, Features
   • Sometimes unnecessary ICMP messages were sent, Release 4.8 Rev. 1, Bugfixes
   • Security feature: "interface back route verify", Release 4.7 Rev. 1, Features
   • New command "rtlookup", Release 4.7 Rev. 1, Features
   • No longer vulnerable to "LAND" denial-of-service attack, Release 4.7 Rev. 1, Bugfixes
   • New "ifstat" options, Release 4.6 Rev. 1, Features
   • Fragmentation of packets > MTU correct, Release 4.6 Rev. 1, Bugfixes
   • Ethernet, duplicate packets, Release 4.5 Rev. 1, Bugfixes
   • Access List Extensions, Release 4.4 Rev. 8, Features
   • Special IP interfaces REFUSE, LOCAL, IGNORE, Release 4.4 Rev. 8, Features
   • In LLC-encapsulation an FRMR was incorrectly sent, Release 4.4 Rev. 2, Bugfixes
   • New HTTP Server to get status information, Release 4.4 Rev. 1 beta, Features
   • In LLC-encapsulation an FRMR was incorrectly sent, Release 4.3 Rev. 13, Bugfixes
   • Ping application now with "-c <cnt>" argument, Release 4.3 Rev. 11, Features
   • "Netstat -p" output for ip_hdlc, Release 4.3 Rev. 7, Bugfixes
   • Reboot fixed, when receiving ICMP-echo larger than 4096 bytes, Release 4.3 Rev. 6, Bugfixes
   • IP-Extended routing, Release 4.3 Rev. 1, Features
     
     
7. IPX:
   • Duplicate ripCircTable and sapCircTable entries problem fixed, Release 4.9 Rev. 4, Bugfixes
   • Manually resetting the NetNumber to 0:0:0 is no longer required, Release 4.9 Rev. 4, Bugfixes
   • IPX RADIUS extensions, Release 4.8 Rev. 6, Features
   • Rare system reboot problem during ipx configuration fixed, Release 4.8 Rev. 3, Bugfixes
   • Problem with "piggy back updates" via RIP fixed, Release 4.8 Rev. 1, Bugfixes
   • Multiple entries in accesslists possiple, Release 4.3 Rev. 4, Bugfixes
     
     
8. ISDN:
   • Reboot when Establishing ISDN Connections fixed, Release 4.9 Rev. 4, Bugfixes
   • Lengthy ISDN S0 Auto Configuration problem fixed, Release 4.9 Rev. 4, Bugfixes
   • Rare reboot of the BRICK after outgoing ISDN connections fixed, Release 4.9 Rev. 3, Bugfixes
   • Wildcards for Dialing numbers, Release 4.8 Rev. 6, Features
   • Wrong TEI values with X.31 bug fixed, Release 4.8 Rev. 6, Bugfixes
   • New ISDN Supplemental Services (Call Transfer), Release 4.8 Rev. 5, Features
   • Local and remote numbers were improperly reported, Release 4.8 Rev. 5, Bugfixes
   • Rare system reboot problem during ISDN autoconfiguration fixed, Release 4.8 Rev. 5, Bugfixes
   • New user login table, Release 4.8 Rev. 1, Features
   • ISDN/V.110 Asynchronous bit rate adaptation, Release 4.5 Rev. 5, Features
   • SPV support, Release 4.5 Rev. 3, Bugfixes
   • Direct Dialin In (DDI) support, Release 4.5 Rev. 1, Features
   • Wildcards for Calling Party's Address, Release 4.4 Rev. 8, Features
   • IsdnLoginallowTable, Release 4.4 Rev. 6, Features
   • New Protocol Japan NTT INS64, Release 4.4 Rev. 2, Features
   • New Protocol Japan NTT INS64, Release 4.3 Rev. 13, Features
   • Callback didn't work properly in 4.3.11, Release 4.3 Rev. 12, Bugfixes
   • Charging info now correctly in accounting string, Release 4.3 Rev. 11, Bugfixes
   • Some problems with call control. When a call collision occured, sometimes connections were held open. An interface was not "down" configurable ("ifAdminStatus" kept always "up" after reload), Release 4.4 Rev. 1 beta, SW release was withdrawn, Bug
   • Additional support of the following ISDN protocols: National ISDN 1, National ISDN 2, Northern Telecom DMS 100, AT&T 5ESS Custom ISDN, Release 4.3 Rev. 10, Features
   • Charging info gets now never negative (former -1.-08 DM was possible), Release 4.3 Rev. 10, Bugfixes
   • IsdnCallState (isdnCallTable) is now always correct, Release 4.3 Rev. 10, Bugfixes
   • X.31 in B-channel (CaseA, CaseB) supported, Release 4.3 Rev. 5, Features
   • CM-UP0 module support, Release 4.3 Rev. 3, Features
     
     
9. MISCELLANEOUS:
   • Supports new BRICKware release, Release 4.9 Rev. 4, Features
   • Configuration Wizard (XS and BinGO! only), Release 4.9 Rev. 1, Features
   • Configuration file transfer via the serial port, Release 4.8 Rev. 7, Features
     
     
10. MODEM:
    • V.90 for BIANCA/BRICK-XL and BIANCA/BRICK-XMP, Release 4.8 Rev. 6, Features
    • Status Display for Modems, Release 4.8 Rev. 6, Features
    • Monitoring modem connections, Release 4.8 Rev. 3, Features
    • Occasional fax connections problem with multi-page fax fixed, Release 4.8 Rev. 3, Bugfixes
    • Problems with CAPI and large data packets fixed, Release 4.8 Rev. 2, Bugfixes
    • XL: Occasional fax modem "hangs" with multiple faxes fixed, Release 4.8 Rev. 1, Bugfixes
    • V.FastClass support with FML-8MOD modem module, Release 4.6 Rev. 3, Features
    • DTMF recognition with FML-8MOD modem module, Release 4.6 Rev. 3, Features
    • Monitoring and reinitialzing, Release 4.6 Rev. 1, Features
    • Correct CONNECT string and speed , Release 4.6 Rev. 1, Bugfixes
    • Made more stable, Release 4.5 Rev. 5, Bugfixes
    • Fax and modem support with CM-AB/V!CAS, Release 4.5 Rev. 3, Features
    • For isdnlogin Modem Profile 1 is always default, Release 4.5 Rev. 3, Bugfixes
    • With baudrates less than 9600 baud, no more characters get lost, Release 4.5 Rev. 3, Bugfixes
    • FM-MOD8 support (K56flex), Release 4.5 Rev. 1, Features
    • FM-MOD8, K56flex Modem Function Module, Release Note FML-8MOD
    • MdmProfileTable, sysPCMTable, Release 4.5 Rev. 1, Features
      
      
11. MODULE:
    • CM-2XBRI (double S0 with FAX/modem) module support, Release 4.8 Rev. 3, Features
    • Fast Ethernet (100 MBit) support (XL, XM2), Release 4.8 Rev. 1, Features
    • STAC hardware compression support for XM2 (FM-STAC), Release 4.8 Rev. 1, Features
    • FM-STAC hardware compression module for BRICK-XL, Release 4.7 Rev. 1, Features
    • FM-MOD8 support (K56flex), Release 4.5 Rev. 1, Features
    • FM-MOD8, K56flex Modem Function Module, Release Note FML-8MOD
    • New CM-BNCTP hardware revision (V. 2.3) supported, Release 4.3 Rev. 6, Features
    • CM-UP0 module support, Release 4.3 Rev. 3, Features
    • X.21 module support, Release 4.3 Rev. 2, Features
      
      
12. NAT:
    • NAT on a Dial-Up Interface problem fixed, Release 4.9 Rev. 4, Bugfixes
    • Wrong NAT session counter fixed, Release 4.9 Rev. 3, Bugfixes
    • Occasional problems with broadcasts via NAT interface fixed, Release 4.9 Rev. 1, Bugfixes
    • IP fragmentation and NAT: Sometimes wrong TTL, Release 4.8 Rev. 1, Bugfixes
    • NAT translations for outgoing connections, Release 4.7 Rev. 1, Features
    • NAT, Release 4.3 Rev. 1, Features
      
      
13. OSPF:
    • RADIUS OSPF Interfaces problem fixed, Release 4.9 Rev. 4, Bugfixes
    • Routing over X.21 now works properly, Release 4.7 Rev. 1, Bugfixes
    • OSPF external routes are imported into RIP correctly, Release 4.7 Rev. 1, Bugfixes
    • Virtual Link Support, Release 4.6 Rev. 2, Features
    • The routing protocol OSPF is now supported, Release 4.6 Rev. 1, Features
      
      
14. PABX:
    • When leaving Setup->PABX->Extensions by "save", incoming calls to "isdnlogin" or "application" are rejected until reboot (4.9 Rev 4 only). Release 4.9 Rev.4 patch 1, Last Minute Information, Bugfixes
    • Call Pickup, Release 4.9 Rev. 4, Features
    • Priority Voice, Release 4.9 Rev. 4, Features
    • Credits based Accounting System, Release 4.9 Rev. 4, Features
    • Sometimes human voice incorrectly were recognized as DTMF tone input, Release 4.9 Rev. 2, Bugfixes
    • Incoming calls with service indicator "telephony" were not accepted, Release 4.9 Rev. 2, Bugfixes
    • Fax Storage (BinGO! Professional only), Release 4.8 Rev. 7, Features
    • V!CAS: New PABX concept, Release 4.8 Rev. 6
      
      
15. PMX:
    • Wrong data in certain cases with V.110, Release 4.6 Rev. 4, Bugfixes
    • New, improved PMX driver, Release 4.4 Rev. 8, Features
    • Problems with heavy receive load fixed, Release 4.3 Rev. 10, Bugfixes
    • With V.110 sometimes wrong characters appeared, when more than one, and less than six stopbits were between two characters, Release 4.3 Rev. 10, Bugfixes
    • Problems with disconnect during high load fixed, Release 4.3 Rev. 5, Bugfixes
    • Problems with back-to-back connection fixed, Release 4.3 Rev. 4, Bugfixes
    • Backplane LED's handled correct (Bug only in 4.3.2), Release 4.3 Rev. 4, Bugfixes
    • Memory lack fixed, Release 4.3 Rev. 2, Bugfixes
      
      
16. POTS:
    • POTS support, TAPI, Release 4.4 Rev. 7, Features
      
      
17. PPP:
    • Dynamic IP Address Pools problem fixed, Release 4.9 Rev. 4, Bugfixes
    • PPP Callback problem (under very specific circumstances) fixed, Release 4.9 Rev. 4, Bugfixes
    • Problem involving accessing Compuserve for the first time fixed, Release 4.9 Rev. 4, Bugfixes
    • Call collision problem with Microsoft Windows clients fixed, Release 4.9 Rev. 1, Bugfixes
    • Address pools for dynamic IP address assignment, Release 4.9 Rev. 1, Features
    • Partner specific PPP settings, Release 4.8 Rev. 7, Features
    • Microsoft Callback Extension to Mode 3, Release 4.8 Rev. 6, Features
    • Microsoft Callback via RADIUS, Release 4.8 Rev. 6, Features
    • Microsoft PPP Compression Protocol for FM-STAC, Release 4.8 Rev. 6, Features
    • MultiLink PPP over leased lines using STAC compression works more stable now, Release 4.8 Rev. 3, Bugfixes
    • ISDN interfaces monitoring bug fixed, Release 4.8 Rev. 2, Bugfixes
    • Slow acknowledgement problem with PCs and Dial-up PPP fixed, Release 4.8 Rev. 2, Bugfixes
    • Encryption (MPPE), Release 4.8 Rev. 1, Features
    • STAC hardware compression support for XM2 (FM-STAC), Release 4.8 Rev. 1, Features
    • "Extended Mode" STAC LZS compression support, Release 4.8 Rev. 1, Features
    • STAC compression works with bundled leased lines, Release 4.8 Rev. 1, Bugfixes
    • STAC LZS compression works with CISCO IOS 11.2 router, Release 4.8 Rev. 1, Bugfixes
    • FM-STAC hardware compression module for BRICK-XL, Release 4.7 Rev. 1, Features
    • Outband RADIUS authentication bug fixed, Release 4.7 Rev. 1, Bugfixes
    • Bug with PMX connections with "x25_ppp" encapsulation fixed, Release 4.7 Rev. 1, Bugfixes
    • Configurable PPPdefault parameters, Release 4.6 Rev. 4, Features
    • Consecutive incoming calls get the right authentication entry, Release 4.6 Rev. 4, Bugfixes
    • MS-CHAP support, Release 4.6 Rev. 3, Features
    • Delayed Callback, Release 4.6 Rev. 2, Features
    • DNS Negotiation configuration, Release 4.6 Rev. 2, Features
    • Charge dependant Short Hold (Dynamic Short hold), Release 4.6 Rev. 1, Features
    • Different PPP Ident for each WAN partner, Release 4.6 Rev. 1, Features
    • Inband Callback (Microsoft CBCP), Release 4.6 Rev. 1, Features
    • Inband CHAP with CISCO, Release 4.6 Rev. 1, Bugfixes
    • Do no longer ignore biboPPPBlockTime, Release 4.5 Rev. 5, Bugfixes
    • Initialisation problems with bundles, Release 4.5 Rev. 3, Bugfixes
    • PPP/X25, new encapsulation x25_ppp_opt, Release 4.5 Rev. 3, Bugfixes
    • V42bis compression problems with Leased Lines, Release 4.5 Rev. 3, Bugfixes
    • Van Jacobson Header Compression (VJHC) (RFC 1144), Release 4.4 Rev. 8, Features
    • Provider support, Release 4.4 Rev. 6, Features
    • STAC compression, Release 4.4 Rev. 2, Features
    • Reboots using RADIUS are now fixed, Release 4.3 Rev. 12, Bugfixes
    • STAC compression, Release 4.4 Rev. 1 beta, Features
    • Some problems with call control. When a call collision occured, sometimes connections were held open. An interface was not "down" configurable ("ifAdminStatus" kept always "up" after reload), Release 4.4 Rev. 1 beta, SW release was withdrawn, Bug
    • The PPP multilink protocol (MP) does now interoperate with Cisco equipment on incoming calls using inband authentication, Release 4.3 Rev. 9, Bugfixes
    • A PPP interface reached sometimes state "blocked" (instead of "dormant") after ShortHold time. Only by resetting the interface, the state "dormant" was reached again, Release 4.3 Rev. 7, Bugfixes
      
      
18. RADIUS:
    • RADIUS OSPF Interfaces problem fixed, Release 4.9 Rev. 4, Bugfixes
    • Sometimes temporary OSPF interfaces were not removed, Release 4.9 Rev. 3, Bugfixes
    • Wrong interface numbers with b-channel bundling, Release 4.9 Rev. 1, Bugfixes
    • IPX RADIUS extensions, Release 4.8 Rev. 6, Features
    • Microsoft Callback via RADIUS, Release 4.8 Rev. 6, Features
    • RADIUS enhancements, Release 4.8 Rev. 1, Features
    • RADIUS "pings" work with Steel-Belted RADIUS server, Release 4.8 Rev. 1, Bugfixes
    • Outband RADIUS authentication bug fixed, Release 4.7 Rev. 1, Bugfixes
    • Multiple RADIUS servers, RADIUS accounting, Release 4.6 Rev. 4, Features
    • New Request ID, Release 4.6 Rev. 2, Bugfixes
    • Enhanced RADIUS features, Release 4.6 Rev. 1, Features
    • Reboots are now fixed, Release 4.4 Rev. 2, Bugfixes
    • Reboots are now fixed, Release 4.3 Rev. 13, Bugfixes
    • Reboots using RADIUS are now fixed, Release 4.3 Rev. 12, Bugfixes
    • Radius, Release 4.3 Rev. 1, Features
      
      
19. RELEASE:
    • Final Release V!CAS, Release 4.9 Rev. 4
    • First Release BRICK-XS2, Release 4.9 Rev. 1
    • First Release BinGO! Plus/Professional, Release 4.8 Rev. 4
    • First Release BRICK-XMP, Release 4.8 Rev. 3
    • First Release BRICK-XM2, Release 4.8 Rev. 1
    • First Release BinGO!, Release 4.6 Rev. 1
    • First Release FM-MOD56K , Release 4.5 Rev. 5
    • First Release V!CAS, Release 4.4 Rev. 7
    • First Release BRICK-XL, Release 4.3 Rev. 21
    • Final Release BRICK-M, Release 4.3 Rev. 4
    • First Release BRICK-XM, Release 4.2 Rev. 1
    • First Release BRICK-XS, Release 4.1 Rev. 5
    • First Release BRICK-M, Release 2.1
      
      
20. SETUP:
    • When leaving Setup->PABX->Extensions by "save", incoming calls to "isdnlogin" or "application" are rejected until reboot (4.9 Rev 4 only). Release 4.9 Rev.4 patch 1, Last Minute Information, Bugfixes
    • WAN Partner Configuration problem fixed, Release 4.9 Rev. 4, Bugfixes
    • Configuration Wizard (XS and BinGO! only), Release 4.9 Rev. 1, Features
    • Configuration file transfer via the serial port, Release 4.8 Rev. 7, Features
    • No reboot while resetting PPP interface, Release 4.8 Rev. 6, Bugfixes
    • Search functionality, Release 4.6 Rev. 2, Features
    • Reboot fixed, when staying a long time in MONITOR menue, Release 4.3 Rev. 6, Bugfixes
    • Accesslists now with Setup configurable, Release 4.3 Rev. 2, Features
      
      
21. SNMP:
    • Wrong command execution problem with biboAdmLoginTable fixed, Release 4.8 Rev. 3, Bugfixes
    • No memory leak if there is no IPX license, Release 4.5 Rev. 5, Bugfixes
    • Send "LinkDown"-Traps on interfaces, Release 4.3 Rev. 4, Bugfixes
      
      
22. STAC:
    • Microsoft PPP Compression Protocol for FM-STAC, Release 4.8 Rev. 6, Features
    • MultiLink PPP over leased lines using STAC compression works more stable now, Release 4.8 Rev. 3, Bugfixes
    • "Extended Mode" STAC LZS compression support, Release 4.8 Rev. 1, Features
    • STAC hardware compression support for XM2 (FM-STAC), Release 4.8 Rev. 1, Features
    • STAC LZS compression works with CISCO IOS 11.2 router, Release 4.8 Rev. 1, Bugfixes
    • STAC hardware compression support for XM2 (FM-STAC), Release 4.8 Rev. 1, Features
    • STAC compression works with bundled leased lines, Release 4.8 Rev. 1, Bugfixes
    • FM-STAC hardware compression module for BRICK-XL, Release 4.7 Rev. 1, Features
    • STAC compression, Release 4.4 Rev. 2, Features
    • STAC compression, Release 4.4 Rev. 1 beta, Features
      
      
23. SYS:
    • Configuration Wizard (XS and BinGO! only), Release 4.9 Rev. 1, Features
    • Credits based accounting system, Release 4.9 Rev. 1, Features
    • Configuration file transfer via the serial port, Release 4.8 Rev. 7, Features
    • Link Quality Monitoring, Release 4.8 Rev. 6, Features
    • New local TCP/UDP service access rules, Release 4.8 Rev. 1, Features
    • New command "rtlookup", Release 4.7 Rev. 1, Features
    • Previously undocumented "trace" command is officially available, Release 4.7 Rev. 1, Features
    • Autologout , Release 4.6 Rev. 2, Features
    • Terminate all local applications when closing shell, Release 4.6 Rev. 2, Bugfixes
    • New "ifstat" options, Release 4.6 Rev. 1, Features
    • Accounting information is calculated correctly, Release 4.4 Rev. 8, Bugfixes
    • Priorities, Release 4.4 Rev. 6, Features
    • Enhanced TimeProtocol (sntp, isdn, tcp, udp), Release 4.4 Rev. 4, Features
    • New commands "p" ("priority") and "ifconfig", Release 4.4 Rev. 4, Features
    • Speed improvement with large configuration files, Release 4.4 Rev. 4, Bugfixes
    • Ping application now with "-c <cnt>" argument, Release 4.3 Rev. 11, Features
    • Better handling of great configurations, Release 4.3 Rev. 11, Bugfixes
    • Charging info now correctly in accounting string, Release 4.3 Rev. 11, Bugfixes
    • "netstat -p" output for ip_hdlc, Release 4.3 Rev. 7, Bugfixes
    • TFTP, problems fixed with great configurations, Release 4.3 Rev. 2, Bugfixes
    • IP-Accounting, Release 4.3 Rev. 1, Features
      
      
24. TAF:
    • TAF syslog messages, Release 4.9 Rev. 3, Features
    • Unneccesary passcode confirmations problem solved, Release 4.8 Rev. 2, Bugfixes
    • Validity timer is no longer reset after shorthold interruption, Release 4.8 Rev. 2, Bugfixes
    • Token Authentication Firewall (TAF), Release 4.8 Rev. 1, Features
      
      
25. TAPI:
    • Reboot no longer required after changing biboAdmCapiTcpPort and biboAdmTapiTcpPort variables, Release 4.9 Rev. 4, Bugfixes
    • Incoming calls are no longer sent to TAPI clients multiple times with different IDs, Release 4.9 Rev. 4, Bugfixes
26. V110:
    • V.110 asynchronous bit rate adaptation, Release 4.5 Rev. 5, Features
    • V.110 available with CM-PRI and CM-EBRI modules, Release 4.3 Rev. 2, Bugfixes
      
      
27. VPN:
    • Reboot problem involving call-setup/tear-downs in rapid succession solved, Release 4.8 Rev. 2, Bugfixes
    • Virtual Private Networking (VPN), PPTP support, Release 4.8 Rev. 1, Features
      
      
28. X.21:
    • X.21 leased line support, Release 4.3 Rev. 5, Features
    • X.21 module support, Release 4.3 Rev. 2, Features
      
      
29. X.25:
    • New Timer in x25LinkPresetTable, Release 4.9 Rev. 4, Features
    • X.25 Routing Priorities problem fixed, Release 4.9 Rev. 4, Bugfixes
    • X.25 Dialout Without Configuration: When disconnecting the X.25 link, the underlaying ISDN connection could remain open, Release 4.9 Rev. 3, Last Minute Information, Bugfixes
    • New timer in x25LinkPresetTable, Release 4.9 Rev. 3, Features
    • Sometimes routing entries with higher metric were not used, Release 4.9 Rev. 3, Bugfixes
    • X.25 PAD, Release 4.9 Rev. 1, Features
    • CALL_CONF packets contain packet/window size if incoming call contained them, Release 4.8 Rev. 7, Bugfixes
    • TP0 bridge: zero-bytes CallUserData packets problem fixed, Release 4.8 Rev. 7, Bugfixes
    • X.25 Window/Packet Size Negotiation, Release 4.8 Rev. 6, Features
    • Layer 2 settings for LLC partners are set correctly, Release 4.8 Rev. 1, Bugfixes
    • LLC partners sometimes received invalid CLEAR packets, Release 4.8 Rev. 1, Bugfixes
    • Facility "Marker" now correct handled, Release 4.6 Rev. 1, Bugfixes
    • Minipad accepts closed user group parameters 100-1000, Release 4.5 Rev. 5, Bugfixes
    • CUG support (Closed User Group), Release 4.5 Rev. 3, Bugfixes
    • Encapsulation with no signalling, Release 4.4 Rev. 6, Bugfixes
    • Encapsulation with no signalling, Release 4.4 Rev. 5, Bugfixes
    • Incoming flow control was incorrect, Release 4.4 Rev. 2, Bugfixes
    • Incoming flow control was incorrect, Release 4.3 Rev. 13, Bugfixes
    • Special '#' character for SrcAddr in X25RewriteTable now works reliable, Release 4.3 Rev. 12, Bugfixes
    • Status to x25-Appl. are now coerrectly sent, Release 4.3 Rev. 12, Bugfixes
    • RFC1086/1006 support - Diagnostic and Clear Code now in plain text, Release 4.3 Rev. 11, Features
    • RFC1086/1006 support - Special '#' character for SrcAddr in X25RewriteTable, Release 4.3 Rev. 11, Features
    • RFC 1086 - incoming call requests are now always accepted, Release 4.3 Rev. 10, Bugfixes
    • Variable "Addr" in x25MprTable now allows following syntax: "Addr={00}499116804817" means: - for outgoing calls the X.25 number 00499116804817 is used - for incoming calls the X.25 addresses 00499116804817 and 499116804817 are accepted, Release 4.3 Rev. 8, Bugfixes
    • No generation of facilities for windowsize and packetsize negotiation, without request from upper levels (MPR or application), Release 4.3 Rev. 4, Bugfixes

Back to Contents

BinTec Documentation

Back to : Top : Contents : Dates of issue : Classification of features and bugfixes : Topics of features and bugfixes : BinTec Documentation :

Last revised 26.03.99 kst
All informations, advices, etc. without demand for correctness or completeness.